|
The Convair RIM-2 Terrier was a two-stage medium-range naval surface-to-air missile (SAM), and was among the earliest surface-to-air missiles to equip United States Navy ships. It underwent significant upgrades while in service, starting with a beam-riding system with range at a speed of Mach 1.8, and ending as a semi-active radar homing system with a range of at speeds as high as Mach 3. It was replaced in service by the RIM-67 Standard ER (SM-1ER). Terrier has also been used as a sounding rocket. == History == The Terrier was a development of the Bumblebee Project, the Navy's effort to develop a surface-to-air missile to provide a middle layer of defense against air attack (between carrier fighters and antiaircraft guns). It was test launched from USS ''Mississippi'' (AG-128) ex (BB-41) on January 28, 1953, and first deployed operationally on the s, USS ''Boston'' (CAG-1) and USS ''Canberra'' (CAG-2) in the mid-1950s, with ''Canberra'' being the first to achieve operational status June 15, 1956. Its US Navy designation was SAM-N-7 until 1963 when it was re-designated RIM-2. For a brief time during the mid-1950s the USMC had two Terrier battalions equipped with specially modified twin sea launchers for land use that fired the SAM-N-7. The Terrier was the first surface-to-air missile operational with the USMC. The launchers were reloaded by a special vehicle that carried two Terrier reloads. 〔 ''Rockets & Missiles'' by Bill Gunston, p. 201, Crescent Books 1979, ISBN 0-517-26870-1〕 Initially, the Terrier used radar beam-riding guidance, forward aerodynamic controls, and a conventional warhead. It had a top speed of only Mach 1.8, a range of only , and was only useful against subsonic targets. Originally, the Terrier had a launch thrust of 23 kN (5,200 lbf), and weight of . Its original dimensions were a diameter of 340 mm, a length of 8.08 m, and a fin span of 1.59 m. Cost per missile in 1957 was an estimated $60,000. 〔 ("Shell Cost Soars" ) ''Popular Mechanics'', July 1957, p. 115.〕 Before it was even in widespread service it was seeing major improvements. The RIM-2C, named the Terrier BT-3 (Beam-riding, Tail control, series 3) was introduced in 1958. The forward control fins were replaced with fixed strakes, and the tail became the control surface. The BT-3 also had a new motor, and featured extended range, Mach 3 speed, and better maneuverability. The RIM-2D Terrier BT-3A(N) used a W45 1kt nuclear warhead, but all other variants used a 218 lb (99 kg) controlled-fragmentation warhead. The RIM-2E introduced semi-active radar homing, for greater effectiveness against low-flying targets. The final version, the RIM-2F, used a new motor which doubled effective range to . The Terrier was the primary missile system of most US Navy cruisers and guided missile frigates built during the 1960s. It could be installed on much smaller ships than the much larger and longer-ranged RIM-8 Talos. A Terrier installation typically consisted of the Mk 10 twin-arm launcher with a 40-round rear-loading magazine, but some ships had extended magazines with 80 or 120 rounds, and the installation in ''Boston'' and ''Canberra'' used a bottom-loading magazine of 72 rounds. The French Navy's Masurca missile was developed with some technology provided by the USN from Terrier. The Terrier was replaced by the extended range RIM-67 Standard missile. The RIM-67 offered the range of the much larger RIM-8 Talos in a missile the size of the Terrier. Terrier has also been used, typically as a first stage in a sounding rocket, for conducting high-altitude research. The Terrier can be equipped with various upper stages, like the Asp, the TE-416 Tomahawk (not to be confused with the similarly named BGM-109 Tomahawk cruise missile) or the Orion. The booster also served as the basis for the MIM-3 Nike Ajax booster, which was slightly larger but otherwise similar, which has also seen widespread use in sounding rockets. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「RIM-2 Terrier」の詳細全文を読む スポンサード リンク
|